The KF9930 is a set-up DC-DC converter that delivers a regulated output current. The device switches at a 1MHz constant frequency,allowing for the use of small value external inductor and ceramic capacitors.

The KF9930 is targeted to be used for driving loads up to 1A from a two-cell alkaline battery. The LED current can be programmed by the external current sense resistor, Rs,connected between the feedback pin (FB) and ground. A low 95mV feedback voltage reduces the power loss in the Rs for better efficiency.During the shutdown mode， the feedback resistor Rs and the load are completely disconnected and the current consumption is reduced to less than 1uA.

  Features

LED Power Efficiency: up to 90%

Current Accuracy: +10%

Low Start-_Up Voltage: 0.9V(ILEo= 270mA)

Low Hold Voltage:0.75V(LED = 200mA)

1MHz Switching Frequency

Uses small,，Low Profile Extemal Components

Low RDS(ON) : 100mQ (TYP.)

Open LED Protection

Over Temperature Protection

Packages: SOT-23-6,SOT89-5 Pb-Free Package

  Application

White LED Torch (Flashlight)

White L ED Camera Flash

DSC(Digital Still Camera)Flash

Cellular Camera Phone Flash

PDA Camera Flash

Camcorder Torch(Flashlight) Lamp

升压型LED驱动IC

升压型LED驱动IC

升压型LED驱动IC